Detailed instructions For Laying Tiles in the Bathroom
Ceramic tiles have been known to mankind for several thousand years. Their excellent properties for protecting walls from moisture penetration and destruction are used to carry out high-quality, long-lasting repairs not only in the bathroom, but also in other rooms.

Ceramic tiles have been known to mankind for several thousand years. Their excellent properties for protecting walls from moisture penetration and destruction are used to carry out high-quality, long-lasting repairs not only in the bathroom, but also in other rooms. Additionally, it is worth noting the external attractiveness, variety of design and color solutions of this wonderful building material.
Laying tiles on a bathroom wall is the most common modern way to protect and decorate a surface. To do the job yourself, you need to follow the existing scheme. It consists of the following steps:
Make a preliminary calculation of the required amount of material.
This is done in order to avoid unnecessary additional expenses and to make a small reserve of facing tiles in case of defects. Measure the area of each wall or floor, and then add up all the results. Choose the optimally suitable tile size of 25 x 30 cm or 27 x 40 cm and be sure to take into account its purpose.
High quality of work directly depends on how even the walls are.
Check for verticality using a building level or plumb line. Any deviations from the norm must be eliminated. Laying tiles in the bathroom without additional leveling of the walls is a guarantee that the work will be ruined. By leveling with a plaster mixture or installing moisture-resistant cardboard, you can achieve a perfectly even condition of the walls.
Before laying tiles
prime the walls. To do this, purchase a high-quality deep penetration primer for the appropriate purpose. Apply with a wide brush, roller or sprayer.
Mix the purchased adhesive mixture in a wide, convenient container.
This is conveniently done with a special drill with a whisk attachment. Always follow the manufacturer's instructions, which are on each package. Correctly prepared glue has a medium, uniform texture, without inclusions or other unnecessary elements.
Pro Tip: Looking for a reliable ceramic flooring installer near Tulsa, OK? Get professional installation services with top-quality results. Trusted experts ready to transform your floors. Call now!
There are several options for laying tiles in the bathroom.
In any case, you should always start by drawing a strictly horizontal line around the perimeter of the room. It will be an excellent guide for each row of ceramic tiles.
-
Using a special comb spatula, apply the prepared adhesive mixture directly to the wall. We begin laying the tiles from the second row, which runs directly along the reference point.
-
Each subsequent tile is pressed firmly against the wall for some time. Excess glue between the seams is removed immediately. This can be easily done with a damp sponge or knife. To ensure that the distance between individual elements and rows is the same, special crosses and wedges are used.
A very responsible and serious matter is bypassing existing communications. The instructions for laying tiles in the bathroom say that the best solution may be to make a plasterboard or foam box. It is quite easy to give the necessary shape to the moisture-resistant material. The finished plasterboard box, installed along the wall or in any necessary place, should be pre-primed. Foam does not require additional processing.
The final stage of all construction work is the final grouting of all seams. This can only be done after the glue has completely dried. The grout prepared according to the manufacturer's instructions is applied with a rubber spatula. After 15 minutes, the remains of the grouting material are removed with a damp and then dry cloth.
What's Your Reaction?






